Shed Roofing Felt Jewsons: A Practical Guide to Choosing and Installing

The choice of shed roofing felt can greatly extend the life of a small outbuilding. This guide explains what shed roofing felt is, the options you’ll typically find at Jewsons, and practical tips for selection and installation. It covers performance factors, installation steps, and maintenance, helping homeowners make an informed decision that protects their sheds from weather, leaks, and wear.

What Is Shed Roofing Felt And Why It Matters

Shed roofing felt is a protective membrane laid over a shed’s roof deck to shed moisture and shield the structure from rain and wind. It acts as an underlayment, pairing with roof coverings like corrugated metal, tiles, or shingles. Quality felt reduces the risk of water intrusion, warping, and mold, especially in climates with frequent rainfall. Modern felt often combines asphalt or bitumen with reinforcing fibers for strength and flexibility, improving durability in varying temperatures.

Common Types Of Roofing Felt You’ll Find At Jewsons

Understanding the different felt options helps homeowners match performance to budget and climate. Below are typical categories stocked by large builders’ merchants, including Jewsons:

  • Traditional Asphalt Felt: Saturated felt sheets reinforced with fiberglass or polyester. Inexpensive and easy to install, suitable for lightweight or temporary sheds.
  • Fiberglass- or Polyester-Reinforced Felt: More tear-resistant than basic asphalt felt, offering longer life and better resistance to wind uplift.
  • Self-Adhesive Felt: Has an asphalt adhesive backing, allowing a glue-free peel-and-stick installation. Ideal for smaller sheds and quick repairs.
  • Mineral-S surfaced Felt: Incorporates mineral granules for UV protection and extra durability, helping resist weathering and aging.
  • Sandwich Or Multilayer Membranes: Some modern systems use multiple layers for enhanced waterproofing and lifespan, sometimes marketed as premium underlays.

When selecting felt, consider climate, roof pitch, and the shed’s age. Low-slope roofs and exposed locations benefit from heavier gauge felt and higher tear resistance.

Need Roofing Help? Get Trusted Local Estimates.
Same-day inspections · Licensed & Insured · Free Local Quotes
Call Now: 877-570-4119

Choosing The Right Felt For Your Shed

Key factors influence the right choice: pitch, climate, exposure, and roof covering compatibility. For most standard sheds in wet areas, a reinforced felt with a minimum 1.0–1.5 mm thickness provides durable protection. If the roof has a steep pitch or high wind exposure, opt for stronger felt or a self-adhesive option to ensure secure adhesion and fewer wrinkles. Consider UV resistance for longevity, as prolonged sun exposure can degrade materials over time.

How To Check Availability At Jewsons

Jewsons typically stocks a range of shed roofing felt and associated accessories. To verify current availability, check the Jewsons website or visit a local branch. Look for product names like “asphalt felt,” “roofing underlay,” or “self-adhesive roofing felt.” Compare specifications such as gauge (thickness), reinforcement type, and weather resistance. If in doubt, staff can recommend products that suit your shed size and roof pitch.

Installation Essentials For Shed Roofing Felt

Proper installation extends the life of the roof and prevents leaks. A well-executed install includes surface preparation, correct overlapping, and secure fastening. The following steps provide a concise guideline:

  • Prepare The Roof: Clean debris, repair damaged boards, and ensure a dry, smooth surface. Replace any warped or rotten sections before laying felt.
  • Start At Eave Edge: Begin at the bottom edge and roll the felt upward. This ensures water drains toward the gutter or lower edge.
  • Overlap And Seal: Overlap each sheet front-to-back and side-to-side by several inches. For self-adhesive felt, remove backing gradually to avoid air pockets.
  • Secure Properly: Use roofing nails or staples recommended for the product. Do not over-tighten, which can cause wrinkling.
  • Edge Finishing: Edge trims or drip edges help manage water runoff and provide a neat finish. Seal vulnerable joints with compatible sealant or tape if required.
  • Inspection After Install: Check for wrinkles, gaps, or loose edges. Repair immediately to prevent moisture intrusion.

Maintenance And Longevity

Maintenance extends the life of shed roofing felt. Regular checks after heavy rain or wind help catch issues early. Look for:

  • Wrinkles or lifting at edges, which may indicate wind uplift or poor adhesion
  • Dry, cracked, or sun-bleached sections that may require replacement
  • Discoloration indicating moisture ingress or mold growth

Cleaning gutters and ensuring proper roof drainage reduces water pooling that can degrade felt. In regions with extreme weather, consider re-fitting or upgrading to a higher-performance felt every 5–10 years, depending on wear and climate.

Cost Considerations And Value

Costs vary by material, thickness, and brand. Traditional asphalt felt is usually the most economical option, while reinforced or mineral-surfaced felts carry a higher upfront cost but offer longer service life. When budgeting, include installation costs if professional help is used. In many cases, a higher-quality felt paired with proper installation reduces long-term maintenance and replacement frequency.

Alternatives To Traditional Felt

For some sheds, builders may consider other underlayment options such as PVC, synthetic membranes, or metal roof systems. These alternatives may offer superior durability and weatherproofing but come with higher material and installation costs. Jewsons and similar retailers often carry complementary products to match alternative roof coverings. Assess the shed’s purpose, expected load, and local climate before choosing an alternative.

Frequently Asked Questions

Q: Can I install shed roofing felt myself? A: Yes, DIY installation is common for small sheds, provided proper safety and basic carpentry skills are used. Follow manufacturer instructions for the specific product.

Need Roofing Help? Get Trusted Local Estimates.
Same-day inspections · Licensed & Insured · Free Local Quotes
Call Now: 877-570-4119

Q: How long does shed roofing felt last? A: Lifespan ranges from 5 to 15 years depending on material, climate, maintenance, and roof exposure. Heavier, reinforced felts generally last longer.

Q: Do I need underlayment if my shed has a metal roof? A: It depends on the system. Some metal roofs use underlayment for additional waterproofing and insulation, while others rely on direct metal-to-deck installation plus sealing tapes.

Tips For U.S. Shoppers Considering Jewsons Options Abroad

Jewsons is a UK-based retailer, and product availability can vary by region. U.S. shoppers should use Jewsons as a reference for product types and performance, then identify equivalent U.S. brands that offer similar felt products. Check local building codes, warranty terms, and climate suitability. When shopping, ask for reinforced, UV-resistant, and self-adhesive options that align with your roof pitch and shedding climate.

Illustrative Quick Reference

The table provides a quick comparison of common shed roofing felt types and their best-use scenarios:

Type Best For Pros Cons
Traditional Asphalt Felt Budget sheds, moderate climates Low cost, easy to install Lower tear resistance, shorter life
Reinforced Felt Most sheds, variable weather Better durability, longer life Higher cost
Self-Adhesive Felt Small or difficult-to-access roofs Easy installation, strong adhesion Adhesive can fail in extreme cold
Mineral Surface Felt High UV exposure areas Excellent UV resistance, durability Higher cost

Similar Posts