Type 17 Roofing Screws: Guide to Self-Drilling Metal Roof Fasteners
The choice of fasteners is crucial for durable metal roofs. Type 17 roofing screws are widely used for securing metal panels to purlins and substructures. They are designed to bite through metal, create a reliable seal, and resist weathering over time. This article explains what Type 17 screws are, their key features, best-use scenarios, installation tips, and maintenance considerations to help homeowners and professionals select the right fasteners for American roofing projects.
What Are Type 17 Roofing Screws
Type 17 roofing screws are self-drilling, self-tapping fasteners with a hex washer head and a raised, flat bearing surface. The “Type 17” designation refers to the specific point design that concentrates cutting edges near the tip, enabling penetration into metal with minimal pre-drilling. These screws are primarily used for metal roofing and wall panels, where an integrated washer provides a weather-tight seal as the screw is driven in. They are commonly offered in galvanized steel, stainless steel, and aluminum to suit different corrosion environments and panel materials.
Key Features and Materials
- Self-Drilling Point: The Type 17 point is optimized for metal-to-metal contact, reducing installation effort and preventing separate pilot holes.
- Hex Washer Head: The wide washer distributes load and helps seal the hole against water infiltration.
- Weather-Resistant Materials: Variants include galvanized steel for cost efficiency, stainless steel for corrosion resistance, and aluminum for lighter panels or coastal environments.
- Sealing Washer: The integrated washer compresses to form a watertight seal around the screw site, reducing leaks at panel joints.
- Thread Style: Metallic threading is designed for metal substrates and underlayment, ensuring secure hold without stripping.
When To Use Type 17 Screws vs Alternatives
Type 17 screws are suited for exposed-fastener metal roofing systems where panels are installed over a structural deck or purlins. They are commonly chosen for:
- Standing seam or ribbed metal panels with pre-punched holes or through-fastened sections
- Applications requiring quick installation and reliable seal
- Projects prioritizing ease of use with self-drilling capability
Alternatives such as Type 1 or Type 3 screws may be used for different roofing profiles, interior metal applications, or when a shorter or longer grip length is needed. Painted or coated screws may be preferred for certain aesthetics or corrosion protection in harsh environments. Matching screw material to panel material and climate is essential to prevent galvanic corrosion and ensure long-term performance.
Installation Best Practices
- Pre-Assessment: Confirm panel thickness, substrate type, and recommended fastener length. Use a screw long enough to penetrate the panel and embed into the substrate without overdriving.
- Proper Pilot and Seal: While Type 17 is self-drilling, ensure the drill bit or driver provides steady torque to avoid stripping heads. Installers should keep the washer flat to prevent leaks.
- Spacing and Pattern: Follow the panel manufacturer’s guidance for fastener spacing. Common patterns align screws with fastener lines or rib centers, depending on panel profile.
- Driving Technique: Use a calibrated drill or impact driver set to the correct torque. Over-tightening can distort the washer or strip the substrate.
- Weather Considerations: Work in dry conditions when possible. Wet conditions can mask misdrives and complicate seal integrity.
- Corrosion and Compatibility: For coastal or highly corrosive environments, choose stainless steel or coated fasteners to maximize longevity and reduce staining on panels.
Sizing, Materials, and Corrosion Considerations
- Length and Diameter: Choose a screw length that ensures at least 3/4 inch of engagement into the substrate, with panel thickness considered. Common diameters range from #8 to #10, depending on panel specs.
- Material Options: Galvanized steel is economical but may corrosion under salt exposure. Stainless steel offers superior corrosion resistance in coastal or humid climates. Aluminum is lightweight and compatible with aluminum panels but can be softer.
- Coatings and Finishes: The coating on the screw (e.g., zinc, ceramic, polymer coatings) should match the panel finish to minimize galvanic reactions and maintain aesthetics.
- Avalanche of Seal: Ensure the installed screw compresses the washer evenly; uneven seating can create leaks or pulp under the washer.
Maintenance and Replacement
- Inspection: Regularly inspect for loose or backed-out screws, damaged washers, or corrosion around fasteners, especially after storms or hail.
- Replacement: Replace any compromised screws promptly. Use the same Type 17 profile and compatible material to maintain performance.
- Seal Integrity: If a washer appears cracked or deformed, consider replacing the screw to preserve the weather seal.
- Warranty Considerations: Verify manufacturer warranties for fasteners and panels, as some warranties require specific fastener types and installation practices.